The Pneumatic Turbine Vibrator aids in the smooth flow of bulky materials by generating vibrations through a weights inserted turbine. The amplitude for these vibrations is always high even at very low pressure and prevents the moving materials from adhering to the hopper walls or the sieves. This non-sticking feature makes the Pneumatic vibrators applicable in the pharmaceuticals, foods, and beverages industries.

Features and benefits

Most vibrations are known to cause very high noise once they start operating. However, with the pneumatic vibrators, the working environment becomes quiet as they generate about 75 Decibels in their entire service life. This feature makes the turbine vibrators safe and cheap to use as operators will not require ear-protecting gear or cause rapid vibrations that may cause crack on walls. The explosion proof feature of these vibrators further enhances safety since they can operate in a wide range of temperatures ranging from 20 to 120 degrees Celsius.

The cost of maintaining the pneumatic vibrator is low as the vibrators comes with pre-lubricated and sealed bearings. The lubrication is for life meaning that no further lubrication is necessary for the entire vibrator useful life. Once the vibrators have started running, you have the surety of no additional and often costly bearing replacement or new lubrication for your vibrators. The pneumatic turbine driven vibrators maintains its speed and efficiency from the times they start operating, which guarantees consistent high quality service. This feature also saves you from the costly closing down for vibrator repairs and maintenance.

The air driven turbine vibrators have an improved air usage efficiency, up to 50% lower than any other vibrator, as no air drawn into the system goes to waste. This high air efficiency is made possible by the tightly fitting turbine within the turbine compartment meaning that the vibrator uses all air entering the confinement to produce the vibrations and to rotate the turbines. With such an efficiency, these vibrators achieve high amplitude vibrations even in very close areas with little air to generate high pressure.

These air-filed turbine vibrators generally have a higher service life than conventional vibrators. Unavailability of metal to metal contact eliminates the wear and tear of vibrator parts. With low friction, there is little or no maintenance issues, which make these industrial vibrators, maintain their resilience. The sealed compartment eliminates the vibrators vulnerability to any form of contamination. The vibrator parts are also protected from any harm by dust or moisture content. This protection prolongs the vibrator’s useful service life to almost three times the other types of vibrators.